It is our mission to be the one-stop-shop for all Electrical and IT products for all our customers.
We are a well known supplier of a comprehensive range of highly reliable Electrical & IT solutions. These products are widely acknowledged for their flawless designs and superior performance characteristics.
CABLE TIES
We offer complete selection of cable ties in various styles, sizes, materials and colors to meet our customer’s needs. A cable tie is a type of fastener for bundling items together primarily electrical cables or wires. Because of their low cost and ease of use, cable ties are ubiquitous, finding use in a wide range of other applications.
Stainless steel versions, either naked or coated with a rugged plastic cater for exterior applications and hazardous environments. The common cable tie normally made of nylon has a flexible tape section with teeth that engage with a pawl in the head to form a ratchet so that as the free end of the tape section is pulled the cable tie tightens and does not come undone.
Some ties include a tab that can be depressed to release the ratchet so that the tie can be loosened or removed, and possibly reused.
Read more
TIE BASE
Cable tie mounts also known as base.
These are various in styles, sizes, materials and colors act as a fixing element for a cable tie to any surface. They are designed to hold cable ties that are of specific width and are selected by the maximum and minimum cable tie width it can accept.
These self-adhesive cable tie mounts have proven their value for many years in many industries particularly where it is not possible to route cables with conventional fixing solutions.
Read more
TERMINALS
Terminals are designed and manufactured for fast assembly, and reliable performance.
We provide an extensive line of tooling designed specifically to provide optimum performance. As the demand for loose piece terminals increases, it becomes essential to provide a complete system for termination products.
It is a point at which a conductor from an electrical component, device or network comes to an end and provides a point of connection to external circuits. A terminal may simply be the end of a wire or it may be fitted with a connector or fastener. The connection may be temporary, as seen in portable equipment, may require a tool for assembly and removal or may be a permanent electrical joint between two wires or devices.
Types of terminals
- Splices
- Cups
- Hooks
- Lugs
- Clips
- Screw terminals
- Wire nuts
Read more
WIRE DUCTS
It refers to a wire trough that easily allows for organization, pulling and separation of cables. Often it features a sliding cover and "fingers" on the side that create slots for cables to be added, removed or rerouted along the length of the run.
The openings on slotted wire ducts feature rounded edges to protect wires and hands from cuts and abrasions. Solid wire duct units are available to protect sensitive cables and electrical wiring from debris, dust and other outside contaminants. Installation is accomplished via drilling or adhesive mounting.
Read more
Labels
A label is a piece of paper, plastic film, affixed to a product on which is printed information or symbols about the product. We provide a full line of on demand printable labels designed to meet all your identifications needs.
- Laser/ink jet labels supplied on 8.5” X 11.00” sheets and can be printed in commercially available laser and inkjet printers.
- Thermal transfer labels supplied on roll offer crisp, clear legends with superior legibility.
Read more
HEAT SHRINK TUBING
It is a shrinkable plastic tube used to insulate wires, providing abrasion resistance and environmental protection for stranded and solid wire conductors, connections, joints and terminals in electrical work. These are various in colors & sizes. It can also be used to repair the insulation on wires or to bundle them together, to protect wires or small parts from minor abrasion, and to create cable entry seals, offering environmental sealing protection. Heat-shrink tubing is ordinarily made of polyolefin, which shrinks radially (but not longitudinally) when heated, to between one-half and one- sixth of its diameter.
Heat-shrink tubing is manufactured in a multitude of varieties and chemical makeups with the exact composition of each type being dependent on the intended application. From near microscopically-thin- wall tubing to rigid, heavy-wall tubing, each type has precise design and chemical additives that make it suitable for meeting any of a wide variety of environmental demands. Heat-shrink tubing is rated by its expansion ratio, a comparison of the differences in expansion and recovery rate.
Read more
SURGE PROTECTION DEVICES
A voltage spike is a transient event, typically lasting 1 to 30 microseconds, which may reach over 1,000 volts. A transient surge protector attempts to limit the voltage supplied to an electric device by either blocking or shorting current to reduce the voltage below a safe threshold.
Read more
POWER SUPPLY
A power supply unit converts mains AC to low-voltage regulated DC power for the internal components of a device. Types of power supply:-
- AC to DC Convertor – Output power available up to 1000W in various adjustable voltage range 5, 12, 15, 24, 48 and current from 2.5A to 40A.
- DC to DC Convertor – Output power available in various adjustable voltage range 5 VDC to 60 VDC and current from 0.7 A to 20A.
Read more
TERMINAL BLOCKS
Terminal blocks are modular, insulated blocks that secure two or more wires together. Terminal blocks are used to secure and/or terminate wires and in their simplest form consist of several individual terminals arranged in a long strip.
Read more
PANDUIT TEFZEL CABLE TIES AND MOUNTS
Panduit Tefzel locking cable ties and mounts are designed for applications requiring resistance to environmental stresses such as chemical attack, gamma radiation, ultraviolet radiation and extreme temperatures.
Ideal for use in nuclear power facilities and chemical processing plants. Low smoke density and excellent flammability rating of UL 94V-0.
For indoor or outdoor use, made of Tefzel, are a distinctive aqua blue in color.
The mounts can be used with Standard and Light-Heavy cross section cable ties.
Read more
PANDUIT VERISAFE VOLTAGE TESTER
Electrical safety has been top-of-mind for manufacturers and plant engineers, while balancing safety and productivity has remained a key challenge. Solutions that offer the ability to keep workers safe and maintain high productivity are critical, especially in industries where regulatory compliance is important.
Panduit’s VeriSafe AVT product has been helping facilities, utilities and other industrial workplaces lead the charge in electrical safety.
Panduit’s VeriSafe AVT was designed to minimize risk to electrical hazards by verifying the absence of voltage before electrical equipment is accessed. With the push of a button, VeriSafe makes it easier for qualified electrical workers to assess an electrically safe environment in a fraction of the time it would otherwise take to verify zero voltage using hand-held portable test instruments. The time-savings is achieved by a fail-safe and reliable automated process, in which VeriSafe tests the tester, verifies installation, assesses the voltage, verifies installation and retests the tester.
Read more